Onda V972 USB Driver helps in connecting the device to PC. On this page, Android USB Drivers provide official Onda V972 drivers along with ADB Driver and Fastboot Driver.

Onda has changed the way dual-core tablets update to Update 1.5.5 and Update 2.0 (Android 4.1.1 (Jelly Bean)). This is different from the first method of update previously released (Update 1.4 and 1.5). Here is how you do it now. This is valid for both V971 and V711.

Step 1: Download the Jelly Bean update from Onda website: V711 V971 Step 2: Remove any external TF or (micro)SD card from tablet. On your Windows XP or 7 PC, unzip the downloaded file from Onda into a folder of the same name. Step 3: Go into the unzipped folder and enter the “USB-Burning-tool-SPI” folder. Step 4: Find the “ImageBurnTool.exe” file. Double-click it to start the update tool. Step 5: Now you need to load the update image (folder “V971D_A4.1.1-1101” -> “Resource.V971D_A4.1.1-1101.zip”).

Note that the image name ends with a.zip. To load into tool, go to the top left hand corner of the tool with the character (配置->导入升级文件), and choose the “Resource” file in the unzipped folder. Step 6: Wait for the tool to fully load the chosen image. You will see it appear in the tool as below. Step 7: Shut down your tablet. The next sequence is very important. Hold down the “Home” button before connecting you tablet to your PC using the USB cable.

While still holding down the “Home” button, press and hold the power button for 4 seconds. Both buttons can be released when you see that the tool has detected the tablet. For users doing it for the first time, go to step 8. If you have done step 8 before, go to step 11. Step 8: This step is to install the driver for the tablet. The “Home” and power button can be released.

When you see the device driver installation appear, choose the 2nd option and click next. Step 9: Make sure you include the driver location of your update zip folder as a location for the system to search to detect the driver. Driver folder is “V971D_A4.1.1-1101″->”USB-Burning-tool-SPI”->”AmlogicusbBurningdriver”. Step 10: Click next and wait for driver to be installed. Step 11: (Make sure steps 8-10 have been done before, else update will not be successful) You should see the tablet as detected at this point.

Points to note: Only 1 tablet can be updated at one time. Do not attempt to update more than 1 tablet at the same time. If the tool detects 2 USB ports with devices even though only 1 tablet has been connected, ignore and proceed. Step 12: Press the “Start” (开始) button on the right side of the tool to start the update process. Step 13: Updating 1 tablet will take about 5-10 minutes.